Enterasys Networks X-Pedition XSR CLI - Manual (Page 590)

Additional Tunnel Termination Commands
14-136 Configuring the VPN
show ip local pool
This command displays statistics for any defined IP address pools.
Syntax
show ip local pool [name]
Mode
Privileged EXEC: XSR#
Sample Output
This output displays when the command is specified without a name:
XSR#show ip local pool
-----------IP Pools Statistics-----------
Pool Subnet Mask Free In use Excluded Reserved
test 10.120.122.0 255.255.255.192 26 7 0 2
local 1.1.1.0 255.255.255.0 255 0 0 1
ddd 1.2.3.4 255.255.255.255 1 0 0 0
test 192.168.57.1 255.255.255.255 1 0 0 0
test1 192.168.57.252 255.255.255.255 1 0 0 0
test3 192.168.58.0 255.255.255.0 246 0 10 0
The following output displays when the command is specified with the name test:
XSR#show ip local pool test
-----------IP Pools Statistics-----------
Statistics of IP pool test
Available addresses:
10.120.122.1
10.120.122.2
10.120.122.3
10.120.122.5
10.120.122.6
10.120.122.7
10.120.122.8
10.120.122.9
10.120.122.11
10.120.122.12
10.120.122.13
10.120.122.14
10.120.122.15
10.120.122.16
10.120.122.17
10.120.122.18
10.120.122.19
10.120.122.20
name Name you specified for an IP address pool.