Enterasys Networks X-Pedition XSR CLI - Manual (Page 144)

Hardware Controller Clear and Show Commands
4-92 Configuring Hardware Controllers
Hardware Controller Clear and Show Commands
clear counters fastethernet
This command clears MIB‐II counters for the FastEthernet interface. The counters cleared include:
• ifInOctets
• ifInUcastPkts
• ifInNUcastPkts
• ifInDiscards
• ifInErrors
• ifOutOctets
• ifOutUcastPkts
• ifOutNUcastPkts
• ifOutDiscards
• ifOutErrors
• ifInUnknownProtos
Syntax
clear counters fastethernet interface sub-interface
Mode
Privileged EXEC: XSR#
Example
The following example clears the MIB‐II counters on FastEthernet port 1, sub‐interface 20:
XSR#clear counters fastethernet 1.20
clear counters gigabitethernet
This command clears the same MIB‐II counters for the interface as the clear counters
fastethernet command.
Syntax
clear counters gigabitethernet interface sub-interface
interface FastEthernet interface number, ranging from 1 to 2.
sub-interface FastEthernet sub‐interface number, ranging from 1 to 64.
interface Interface number, ranging from 1 to 3.
sub-interface Sub‐interface number, ranging from 1 to 64.