Enterasys Networks X-Pedition XSR CLI User Manual

Page 130

Bootrom Monitor Mode Commands

3-124 Configuring the XSR Platform

This command sets system time using the syntax

hh mm ss

. For example:

XSR:dt 11 59 59

This command formats the Flash file system. We recommend you first save any

.dat

.cert

.cfg

and your

startup-config

files to

cflash:

or a PC since any files in

flash:

will be deleted. You

are prompted to enter data by the following script:

XSR-1800: ff
You will lose all files in the “flash:” file system.

Are you sure you want to format the “flash:” file system? (y/n) y

Unlocking flash file sectors
Initializing DOS file system.
Formatting flashrom file system
...................................................... Done.
Set working directory to flash:

Using default Bootrom password. The system is not secure!!!
Use “bp” to change password
XSR-1800:

ffc

This command formats the CompactFlash file system.

This command retrieves a file over the network using a remote IP address and remote file path.

This command modifies network parameters. You are prompted to enter data by the following
script. While most of the options are self‐explanatory, three require further description.

•

When set to no, the Autoboot option places the prompt in Bootrom mode when you boot or
power up the XSR.

•

When set to yes, the default Quickboot action of delaying five seconds at startup for you to
optionally enter

CTRL-C

and acquire Bootrom mode is negated. You can still acquire Bootrom

mode, but you must immediately press

CTRL-C

upon seeing the X‐Pedition Security Router

Bootrom header.

•

The default hostname (local target name), XSR‐1800, cannot be changed. In the absence of a
user‐supplied hostname via the

hostname

CLI command, this name will be used as the CLI

prompt and SNMP hostname in MIB‐II.

XSR-1800: np

Enter ‘.’ = clear a field; ‘-’ = go to previous field; ^C = quit

Local IP address (192.168.1.1) :
Gateway IP address () :