Enterasys Networks X-Pedition XSR CLI - Manual (Page 155)

Hardware Controller Clear and Show Commands
XSR CLI Reference Guide 4-103
ifLastChange 00:00:00
ifInOctets 0
ifInUcastPkts 0
ifInNUcastPkts 0
ifInDiscards 0
ifInErrors 0
ifInUnknownProtos 0
ifOutOctets 0
ifOutUcastPkts 0
ifOutNUcastPkts 0
ifOutDiscards 0
ifOutErrors 0
ifOutQLen 256
show interface loopback
This command displays information about the loopback interface.
Syntax
show interface loopback [number]
Mode
Privileged EXEC or Global configuration: XSR# or XSR(config)#
Sample Output
The following is sample output from Loopback interface 5:
XSR#show interface loopback5
Loopback5 is Admin Up
Description: My loopback interface
Internet address is 57.57.57.57, subnet mask is 255.255.255.0
show interface multilink
This command displays information about the Multilink interface.
Syntax
show interface multilink [number]
Mode
Privileged EXEC or Global configuration: XSR# or XSR(config)#
Sample Output
The following is sample output from Multilink interface 8:
number Loopback address number ranging from 0 to 15.
number Multilink address number, ranging from 1 to 32767.