Enterasys Networks X-Pedition XSR CLI - Manual (Page 123)

File System Commands
XSR CLI Reference Guide 3-117
XSR#show reload
No reload is scheduled
No EOS fallback
Parameter Description
show running-config
This command displays the router’s running configuration as a sequence of CLI commands
segmented by module. The XSR gathers data from all system modules but collects and displays
only those values different from default settings.
Syntax
show running-config
Mode
Privileged EXEC: XSR#
Example
XSR#show running-config
Sample Output
The XSR 1800 Series sample output below displays as a number of CLI commands under the
appropriate modules:
XSRtop(config)#show running-config
!PLATFORM
! CLI version 1.5
! XSR-1800
! Software:
! Version 5.5.1.2, Built Jul 17 2003, 13:50:37
hostname XSRtop
!NETWORK MANAGEMENT
username admin privilege 15 "password is not displayed"
running/not polling Scheduled reload timer is running or the test period is in progress.
crash monitoring A reload check for system failure.
fallback config Fallback enabled or disabled.
snmp monitoring A reload check for SNMP messages and SNMP server IP address.
test duration The interval reload monitors for primary EOS crashes, a syntax error
in startup‐config, and SNMP messages for a configurable period
between 5 and 30 minutes.
primary file Directory and filename (including device name) of primary EOS file.