Enterasys Networks X-Pedition XSR CLI - Manual (Page 41)

snmp-server Commands
XSR CLI Reference Guide 1-27
Syntax
snmp-server set entityMIB {entPhysicalAlias | entPhysicalAssetID} host <string>
Syntax of the “no” Form
The no command sets the PhysicalAlias or PhysicalAssetID in the Entity MIB as an empty string:
no snmp-server set entityMIB {entPhysicalAlias | entPhysicalAssetID} host
Mode
Global configuration: XSR(config)#
Example
The following example provides an alias for the host:
XSR(config)#snmp-server set entityMIB entPhysicalAlias host aliasSalesServer
snmp-server system-shutdown
This command allows the SNMP server to reboot the XSR (usually after a software download).
Syntax
snmp-server system-shutdown
Syntax of the “no” Form
The no command disallows the SNMP server from rebooting the XSR:
no snmp-server system-shutdown
Mode
Global configuration: XSR(config)#
Default
Enabled
Example
The following example permits the SNMP server to reboot the XSR:
XSR(config)#snmp-server system-shutdown
entPhysicalAlias An alias name for the physical entity.
entPhysicalAssetID A user‐assigned asset tracking identifier for the physical entity.
string Text for the alias or ID not to exceed 32 characters.