Enterasys Networks X-Pedition XSR CLI - Manual (Page 421)

Frame Relay Map Class Commands
XSR CLI Reference Guide 9-97
Syntax
frame-relay bc out bits
Syntax of the “no” Form
The no command resets the committed burst size to its default value:
no frame-relay bc out
Mode
Map Class configuration: XSR(config-map-class)#
Default
7000 bits
Example
This example creates the map class slowlink with bc set to 6000 bits:
XSR(config)#map-class frame-relay slowlink
XSR(config-map-class)#frame-relay bc out 6000
frame-relay be
This command specifies the outgoing excess Burst size (Be) for a Frame Relay map‐class.
Syntax
frame-relay be out bits
Syntax of the “no” Form
The no command resets the committed burst size to its default value:
no frame-relay be out
Mode
Map Class configuration: XSR(config-map-class)#
Default
7000 bits
out Sets the traffic direction ‐ output rate limiting only.
bits Committed burst size, in bits.
out Sets the traffic direction ‐ output rate limiting only.
bits Committed burst size in bits.