Enterasys Networks X-Pedition XSR CLI - Manual (Page 336)

Observing Syntax and Conventions
7-88 Configuring IP Multicast
Mode
Interface configuration: XSR(config-if)#
Default
Two times the query interval
Example
The following example sets the XSR to wait 30 seconds from the time it received the last query
before it takes over as the querier for the interface:
XSR(config-if)#ip igmp querier-timeout 30
ip multicast ttl-threshold
This command sets the Time‐To‐Live (TTL) threshold of packets being forwarded out an interface.
Syntax
ip multicast ttl-threshold ttl-value
Syntax of the “no” Form
The no form of this command sets this threshold to the default value:
no ip multicast ttl-threshold
Mode
Interface configuration: XSR(config-if)#
Default
Zero ‐ all multicast packets are forwarded out the interface.
Example
The following example sets the TTL threshold on a border router to 20. Multicast packets must
have a TTL greater than 20 in order to be forwarded out this interface:
XSR(config-if)#ip multicast ttl-threshold 20
ttl-value Time‐to‐live value, ranging from 0 to 255 hops.