Enterasys Networks X-Pedition XSR CLI - Manual (Page 152)

Hardware Controller Clear and Show Commands
4-100 Configuring Hardware Controllers
show interface dialer
This command displays information about the Dialer interface.
Syntax
show interface dialer [number]
Mode
Privileged EXEC or Global configuration: XSR# or XSR(config)#
Sample Output
The following example displays information about Dialer interface 3:
XSR#show interface dialer 3
********** Dialer Interface Stats **********
Dialer3 is Admin Down
Internet address is not assigned
Dialer3
Dialer state is: DOWN
Wait for carrier default: 60, default retry: 3
Dial String Success Failures Map Class
Free pool ISDN channels: <0>
Free pool serial ports: <0>
show interface fastethernet
This command displays information about a FastEthernet interface. This interface is available on
the XSR 1800 Series routers only.
Syntax
show interface fastethernet [number]
Mode
Privileged EXEC or Global configuration: XSR# or XSR(config)#
Sample Output
The following is sample output from FastEthernet interface 1:
XSR#show interface FastEthernet 1
FastEthernet1 is Admin Up
Internet address is 51.51.51.1, subnet mask is 255.255.255.0
Internet address is 52.52.52.1, subnet mask is 255.255.255.0 Secondary
Internet address is 53.53.53.1, subnet mask is 255.255.255.0 Secondary
number Dialer interface number, ranging from 0 to 255.
number FastEthernet interface number of 1 or 2.