Clear interface fastethernet, Clear interface gigabitethernet – Enterasys Networks X-Pedition XSR CLI User Manual

Page 145

Hardware Controller Clear and Show Commands

XSR CLI Reference Guide 4-93

Mode

Privileged EXEC:

XSR#

Example

The following example clears the MIB‐II counters on GigabitEthernet port 3, sub‐interface 2:

XSR#clear counters gigabitethernet 3.2

clear interface fastethernet

This command resets the hardware logic on the FastEthernet interface. Using it preserves the
current loopback mode, duplex mode and speed. This command is available on the XSR 1800
Series routers only.

Syntax

clear interface fastethernet number

Mode

Privileged EXEC:

XSR#

Example

XSR#clear interface fastethernet 2

clear interface gigabitethernet

This command resets the hardware on the GigabitEthernet interface. This command is available
on the XSR 3000 Series routers only.

Syntax

clear interface gigabitethernet number

Mode

Privileged EXEC:

XSR#

Note: Issuing this command causes the interface to drop its link, any packets that it may have
received, and any packets that may be in the process of being transmitted, while it resets. It
preserves the current loopback mode, duplex mode and speed.

number

FastEthernet interface number ranging from 1 to 2.

number

GigabitEthernet port, ranging from 1 to 3, and sub‐interface, ranging from 1 ‐ 64.