Enterasys Networks X-Pedition XSR CLI - Manual (Page 20)

General Network Management Commands
1-6 Network Management
Syntax
ip http server [enable | disable]
Syntax of the “no” Form
The no form of this command disables the HTTP server:
no ip http server
Mode
Global configuration: XSR(config)#
Default
Disable
Examples
XSR(config)#ip http server enable
XSR(config)#no ip http server
ip ssh server
This command enables/disables Secure Shell (SSH) service to the client. Because the SSH server is
enabled at boot‐up, you can either manually disable the SSH server using CLI, or disable the SSH
server in the startup‐config file. If the optional parameter is not supplied, the SSH server will be
enabled.
Syntax
ip ssh server [enable | disable]
Syntax of the “no” Form
The no form of this command disables the SSH server:
no ip ssh server
Mode
Global configuration: XSR(config)#
Defaults
• Enabled
enable Enables HTTP server.
disable Disables HTTP server.
enable Enables SSH server.
disable Disables SSH server.