Enterasys Networks X-Pedition XSR CLI - Manual (Page 371)

PPP Debug, Clear and Show Commands
XSR CLI Reference Guide 8-101
Mode
EXEC or Global configuration: XSR> or XSR(config)#
Sample Output
The following output is displayed for Serial and Multilink interfaces:
XSR#show ppp
Serial 1/0 PPP State:
LCP State: OPENED IPCP State: OPENED Multilink State: OPENED
Multilink 8 MLPPP State:
LCP State: OPENED IPCP State: OPENED Multilink State: OPENED
The following output is displayed for configured Dialer interfaces:
XSR#show ppp
Dialer0 LCP Current State:
INITIAL IPCP Current State: INITIAL
Dialer1 MLPPP State:
LCP State: opened Multilink State: opened
Dialer2 MLPPP State:
LCP State: opened Multilink State: opened
Dialer3 MLPPP State:
LCP State: opened Multilink State: opened
Dialer4 MLPPP State:
LCP State: opened Multilink State: opened
Dialer5 MLPPP State:
LCP State: opened Multilink State: opened
Dialer33 MLPPP State:
LCP State: opened Multilink State: opened
Dialer44 MLPPP State:
LCP State: opened Multilink State: opened
Dialer1 MLPPP State:
LCP State: opened Multilink State: opened
Multilink 4 MLPPP State:
LCP State: opened Multilink State: opened
show interface serial
This command displays interface statistics and PPP status if the interface is encapsulated with
PPP.
Syntax
show interface [card/port:channel number] [type | type number]
card/port The PPP WAN port for which to view link status, stats and configuration data.
type Serial or Dialer ‐ Interface types which PPP can run on.
number Card/port ‐ for serial interface.
Card/port:channel number ‐ for serial channel groups.
Number ‐ for other logical interfaces such as Dialer.