Ppp multilink fragment disable – Enterasys Networks X-Pedition XSR CLI User Manual
Page 387
Multilink PPP Commands
XSR CLI Reference Guide 8-117
ppp multilink fragment disable
This command disables fragmentation over a bundle PPP connection, supporting Multilink and
Dialer interfaces.
Syntax
ppp multilink fragment disable
Syntax of the “no” Form
The no form of this command enables fragmentation (default mode):
no ppp multilink fragment disable
Mode
Interface configuration:
XSR(config-if
Default
Enabled
Examples
The following example disables fragmentation over Multilink interface 1:
XSR(config-if
Display Examples
The following examples display fragmentation settings by the
show interface multilink
command:
XSR#show interface multilink 1
********** Multilink Interface Stats **********
Multilink 1 is Admin Up
Internet address is 30.30.30.2, subnet mask is 255.255.255.0
LCP State: OPENED
IPCP State: OPENED
Multilink State: OPENED
Multi-Class State: OPENED
Multilink header format is LONG SEQ NUM
Class suspendable level is 5 tx classes and 5 rcv classes
Fragmentation is disabled
……
The following example displays fragmentation settings by the
show ppp interface multilink
command:
XSR#show ppp interface multilink 1
********** MLPPP Bundle Stats **********
Multilink 1: MLPPP is Admin Up / Oper Up