Enterasys Networks X-Pedition XSR CLI - Manual (Page 146)

Hardware Controller Clear and Show Commands
4-94 Configuring Hardware Controllers
Example
The following example resets GigabitEthernet port 1, sub‐interface 5:
XSR#clear counters gigabitethernet 1.5
clear counters serial
This command clears serial interface counters. The counters cleared are:
• ifInOctets
• ifInUcastPkts
• ifInNUcastPkts
• ifInDiscards
• ifInErrors
• ifOutOctets
• ifOutUcastPkts
• ifOutNUcastPkts
• ifOutDiscards
• ifOutErrors
• ifInUnknownProtos
Syntax
clear counters serial [card / port]
Mode
Privileged EXEC: XSR#
Example
XSR#clear counters serial 1/0
clear interface serial
This command resets the hardware logic on a serial interface.
card XSR card number.
port XSR port number.
Note: Issuing this command will cause the interface to drop its link, any packets that it may have
received, and any packets that may be in the process of being transmitted, while it resets.