Enterasys Networks X-Pedition XSR CLI - Manual (Page 256)

IP Clear and Show Commands
5-180 Configuring the Internet Protocol
Parameter Description
show tcp
This command displays TCP statistics.
Syntax
show tcp {connections | general}
Configuration Mode
EXEC or Global configuration: XSR> or XSR(config)#
Sample Output
The following are sample responses:
Connection Table
XSR>show tcp connections
-----------TCP Statistics-----------
Current Connections
Local Address
Foreign Address Connection State
134.141.235.165.23 134.141.235.124.1573 ESTAB
134.141.235.165.23 134.141.235.150.1588 ESTAB
General Information Display
XSR>show tcp general
-----------TCP Statistics-----------
TCP General Infomation
Maximum number of TCP connections is dynamic
2 connections in state ESTABLISHED or CLOSE-WAIT
Retransmission timeouts: min 220ms; max 684 ms
Rcvd: 870 total
0
errors
Sent: 701 total
2 retransmitted
1 containing the RST flag
0 transitions from CLOSED to SYN-SENT
64MgB Amount of memory installed in the XSR.
Resource Table, table entry, user, or SNMP category.
ResourcesInUse Sum of entries currently in use.
Bytes Per Resource Sum (in bytes) of memory in use by each entry.
Total Bytes InUse Sum (in bytes) of memory currently used by this resource.
connections A summary connections display.
general A detailed general information display.