Enterasys Networks X-Pedition XSR CLI - Manual (Page 16)

General Network Management Commands
1-2 Network Management
General Network Management Commands
banner
This command creates a login banner at the XSR’s CLI prompt. Text is entered one line at time and
should not exceed 80 characters per line. Each successive entry adds a line to the banner, as shown
in the example.
Syntax
banner login bannerLine
Syntax of the “no” Form
Use the no form of this command to remove all banners:
XSR(config)#no banner login
Mode
Global configuration: XSR(config)#
Example
The following example configures a login banner:
XSR(config)#banner login “Welcome Larry”
XSR(config)#banner login “You’re in the office now”
XSR(config)#banner login “Start working!”
configure terminal
This command enters configuration mode from Privileged EXEC mode.
Syntax
configure terminal
Mode
Privileged EXEC: XSR#
Example
XSR#configure terminal
bannerLine Text to be displayed at login. A maximum of 50 lines can be written per
banner. Text must be enclosed in quotes.