Enterasys Networks X-Pedition XSR CLI - Manual (Page 177)

OSPF Commands
XSR CLI Reference Guide 5-101
Syntax of the “no” Form
The no form of this command cancels the redistribution of routes:
no redistribute from_protocol [metric metricvalue]
Mode
Router configuration: XSR(config-router)#
Default
Disabled
Examples
This example redistributes static routes from 5 hops away into RIP:
XSR(config-router)#router rip
XSR(config-router)#redistribute static 5
The following example redistributes intra, inter and external OSPF routes into RIP:
XSR(config-router)#redistribute ospf match internal match external
The following example imports all OSPF routes into RIP with the default RIP metric of 1. It is
equivalent to the command entered earlier.
XSR(config-router)#redistribute ospf
router ospf
This command enables the Open Shortest Path First (OSPF) protocol.
Syntax
router ospf process-id
Syntax of the “no” Form
The no form of this command disables OSPF:
no router ospf process-id
Mode
Global configuration: XSR(config)#
metric-value Cost of a route being redistributed into OSPF, ranging from 0 to 16,777,214.
metric-type OSPF exterior metric type.
1/2 OSPF external Type 1 or 2 metrics.
route-map-
number Number of the associated route map.
process-id Process ID number.