Enterasys Networks X-Pedition XSR CLI - Manual (Page 473)

ISDN Debug and Show Commands
Book Title goes here 11-95
• PRI ‐ show interface serial 2/1:0 - 14 , 16-30 for E1 B channels
Use the following table for reference.
Syntax (PRI)
show interface bri [card/port]:[channel number]
Syntax (BRI)
show interface bri [card/port]:[channel number]
Mode
Privileged EXEC or Global configuration: XSR# or XSR(config)#
Sample Output
The following output is displayed for the BRI interface 1/1:0:
********** Serial Interface Stats **********
D-Serial 1/1:0 is Admin Up / Oper Down
********************** ISDN Stats ISDN-BRI 1/1 *********************
Layer 1: DOWN Layer 2: DOWN State: OFFLINE Admin Up Oper Down
Term. 1 Spid:2200555 State: OFFLINE Cause: 000
Term. 2 Spid:2201555 State: OFFLINE Cause: 000
Total Length = 257
The name of this device is bri1/1/0.
The card is 1.
The port is 1.
The following output is displayed for the PRI interface 2/1:
********************** ISDN Stats ISDN-PRI 21 *********************
Layer 1: UP Layer 2: UP State: ONLINE Admin Up Oper Up
Table 11-1 Channel Number Mappings
Service Provider Channel
Numbering Enterasys Channel
Numbering
B‐channels D‐channels B‐channels D‐channel
T1 1‐23 24 0‐22 23
E1 1‐31 16 0‐30 (not 15) 15
BRI 1, 2 ‐ 1, 2 0
:channel Valid channel numbers are: E1 ‐ 0 to 30 (D‐channel: 15),
number T1 ‐ 0 to 22 (D‐channel: 23)
channel number 1 and 2 (0 is the D‐channel)