Show ppp interface dialer x mlpppgroup x bap – Enterasys Networks X-Pedition XSR CLI User Manual
Page 403
Multilink Show Commands
XSR CLI Reference Guide 8-133
Rx Stats
Tx Stats
show ppp interface dialer x mlpppgroup x bap
This command displays BAP multilink bundle statistics of a specific bundle under the dialer
interface. You can view individual multilink bundles when more than one exists on the dialer
interface.
Syntax
show ppp interface dialer <number> mlpppgroup <number> bap
Mode
EXEC:
XSR>
Sample Output
The following is sample output from the command:
********** MLPPP Bundle Stats **********
Dialer1: MLPPP is Admin Up / Oper Up
Group Num: 1
LCP State: OPENED
IPCP State: OPENED
Total
Sum of fragments received for this class.
Discard
SeqError
Sum of received fragments discarded for this class because sequence number is
out of order over this member link.
FlistFull
Sum of received fragments discarded for this class over this member link
because fragment list is full.
Seq Sum of received fragments discarded for this class over this member link NoBgnFlg Sum of received fragments discarded for this class over this member link AddFgFail Sum of received fragments discarded for this class over this member link CleanQ Sum of received fragments discarded for this class over this member link while Total Sum of fragments transmitted for this class under this member link. Discard CleanQ Sum of transmission fragments discarded for this class under this member Qfull Sum of transmission fragments discarded for this class under this member number Dialer interface number, ranging from 0 to 255. number Multilink bundle number, ranging from 0 to 255.
because sequence number is less than expected.
because no BEGIN flag is deteced.
because fragment can not be added to the fragment list.
cleaning the interface.
link during interface cleaning.
link because transmission queue is full.