Parameters in the interface response – Enterasys Networks X-Pedition XSR CLI User Manual
Page 535
ATM Clear and Show Commands
XSR CLI Reference Guide 13-109
The logical link is currently Up
The Name of the Access Concentrator is ENTERASY-CDDU1S
The Session Id is 0x000b
The MAC Address of the Access Concentrator is 0x00:60:f9:11:01:08
The MTU is 1492
The name of this device is adsl-0
Administrative state is ENABLED
Operational State is UP
Circuit monitoring enabled
VPI is 1.
VCI is 32.
ifindex 0
ifType 0
ifAdminStatus 1
ifOperStatus 1
ifLastChange 00:02:34
ifInOctets 20510
ifInUcastPkts 408
ifInNUcastPkts 0
ifInDiscards 0
ifInErrors 0
ifInUnknownProtos 0
ifOutOctets 37728
ifOutUcastPkts 388
ifOutNUcastPkts 0
ifOutDiscards 0
ifOutErrors 0
ifOutQLen 100
Parameters in the Interface Response
ATM 1/0 is Admin Up / Oper Up
Administrative state: Admin Up or Admin Down and
Operational state: Oper Up or Oper Down.
The name of this device is adsl-0
Hardware device name.
Administrative State is ENABLED
Driver administrative state: ENABLED or DISABLED.
Operational State is UP
Driver operational state is UP or DOWN.
OAM circuit is UP
Driver OAM channel state is UP or DOWN.
The upstream data rate is 480 kbit/
sec.
Negotiated upstream data rate.
The downstream data rate is 10208
kbit/sec.
Negotiated downstream data rate.