Enterasys Networks X-Pedition XSR CLI - Manual (Page 238)

Other IP Commands
5-162 Configuring the Internet Protocol
Syntax
ip proxy-dns enable
Syntax of the “no” Form
The no form of this command disables Proxy DNS:
no ip proxy-dns enable
Mode
Global configuration: XSR(config)#
Default
Disabled
ip proxy-dns name server
This command specifies up to six name servers the proxy DNS server will use.
Syntax
ip proxy-dns name-server server-address1 [server-address2...server-address6]
Syntax of the “no” Form
The no form of this command removes the configured name server:
no ip proxy-dns name-server server-address1 [server-address2...server-address6]
Mode
Global configuration: XSR(config)#
Example
In the following example, 10.10.10.1 is configured as a name server:
XSR(config)#ip proxy-dns name-server 10.10.10.1
ip redirects
This command enables sending redirect messages if the software is forced to resend a packet
through the same interface on which it was received.
Syntax
ip redirects
server-address1 IP address of the name server.
server-address2...server-address6 IP address of additional name servers.