Enterasys Networks X-Pedition XSR CLI - Manual (Page 681)

Firewall Show Commands
XSR CLI Reference Guide 16-137
Mode
EXEC or Privileged EXEC Mode: XSR> or XSR#
Sample Output
The following output displays firewall service group data:
Name Service objects
all-my-tcp-services my-ftp
my-telnet
show ip firewall policy
This static counter displays all policy objects in the order they will be applied. If a name is
specified then only that policy object is displayed.
Syntax
show ip firewall policy [name]
Mode
EXEC or Privileged EXEC Mode: XSR> or XSR#
Sample Output
The following sample output displays configured firewall policies:
Name Source Network Destination Network Service Action
outftp admin ANY_EXTERNAL ftp allow
outhttp priv-network ANY_EXTERNAL http allow
inftp partner1 sales ftp allow-auth mkt
show ip firewall sessions
This dynamic counter displays firewall data regarding TCP, UDP and ICMP sessions that have
passed through the firewall since it was enabled.
Syntax
show ip firewall sessions [tcp | udp | icmp]
name Name of the policy object to display.
tcp Displays only TCP sessions.
udp Displays only UDP sessions.
icmp Displays only ICMP sessions.
Note: Sessions do not display for IP broadcast packets.