Enterasys Networks X-Pedition XSR CLI - Manual (Page 401)

Multilink Show Commands
XSR CLI Reference Guide 8-131
IPCP State: OPENED
Multilink State: OPENED
Multi-Class State: OPENED
Multilink header format is LONG SEQ NUM
Class suspendable level is 5 tx classes and 5 rcv classes
Serial 1/0:0
Tx: Total 0 Discard 0(0/0)
Rx: Total 0 Discard 0
PPP Multilink Member Link Paremeter Descriptions
The detail of transmit/receive statistics for the member link
Tx
Rx
show ppp interface multilink/dialer memberlink multi-class
This command displays multi‐class statistics on the member link under MLPP.
Syntax
show ppp interface multilink <1-32767> memberlink multi-class <type number>
show ppp interface dialer <1-256> memberlink multi-class <type number>
Parameters
Mode
EXEC: XSR>
Sample Output
The following example displays output of this command:
Serial 1/00 Name of the member link.
Total Sum of fragments transmitted over this member link.
Discard Sum of transmitting fragments discarded over this member due to invalid length or
no lower layer.
Total Sum of fragments received over this member link.
Discard Sum of received fragments discarded over this member link.
type Interface type Serial. If serial is specified, only this serial member link statistics
display, otherwise all member link data display.
number Card/port numbers for a Serial port. Card/port:channel numbers for Serial channel
groups.