Enterasys Networks X-Pedition XSR CLI - Manual (Page 254)

IP Clear and Show Commands
5-178 Configuring the Internet Protocol
0 link state updates, 0 link state acks
Sent: 0 total
ARP statistics:
Rcvd: 87441 requests, 5 replies
Sent: 3 requests, 36 replies (0 proxy)
Parameter Description
show resources
This command displays the allowable number of resource entries created and memory utilized.
Values displayed reflect the amount of memory installed in your XSR. Monitoring memory usage
can help you avoid over‐allocating memory to a particular resource and triggering a shortage.
Syntax
show resources
Mode
EXEC or Global configuration: XSR> or XSR(config)#
Sample Output
The following is sample output:
XSRtop#show resources
|Resources|Bytes Per|Total Bytes|Requests
( 64MgB) Resource|InUse |Resource |InUse |Denied
========|=========|=========|===========|========
Number of Dynamic ARPs| 1| 96| 96| 0
Number of Static ARPs| 0| 192| 0| 0
Total Sum of datagrams received.
Local destination Sum of local datagrams successfully delivered to upper layers.
To be forwarded Sum of input datagrams, for which the XSR is not the destination.
Header errors Sum of input datagrams discarded due to errors in the IP header,
including bad checksum, version number mismatch, ttl exceeded, other
format errors.
IP destination not valid Sum of input datagrams discarded due to IP destination address not
valid.
Unknown protocol Sum of locally addressed datagrams discarded because of unknown or
unsupported protocol.
Discards Sum of input/output datagrams with no problems, but discarded due to
internal reasons (such as lack of buffers).
Generated Sum of packets internally generated.
Drop no route Sum of packets to be transmitted and dropped because of non existent
route to destination.