Enterasys Networks X-Pedition XSR CLI - Manual (Page 131)

Bootrom Monitor Mode Commands
XSR CLI Reference Guide 3-125
Remote Host IP address (192.168.1.10) :
Remote file path (c:\) :
Use TFTP (no) :
Ftp userid (anonymous) :
Ftp password () :
Local target name (robo1) :
Autoboot (yes) :
Quick boot (no) :
Permanently save the network parameters? (y/n)
ns
This command saves a file over the network using a remote IP address/file path.
rename
This command renames a file using the syntax rename
sb
This command displays boot parameters with this sample output:
XSR-1800: sb
Current boot file is xsr1800.fls
Boot selector default is flashrom, compactFlash, network
Available Network boot devices: Eth1
sf
This command displays a fault report with the following sample output for the XSR 1800 Series.
On XSR 3000 Series routers, you can enter
sf 0 or sf 1 to display output from either CPU.
XSR-1800: sf
No fault report at 0x1feef00
This command displays the following sample output on the XSR‐3250:
XSR-3250: sf
Software Revision: 6.0.0.0 without VPN; without Firewall
Creation Date: Sep 7 2003, 16:07:42
Broadcom BCM1250 Rev 2 CPU0 up-time 0 hours 2 minutes 20 seconds
Crashed Task = PP, Task Status = 0, errno=0 initStage=0
Exception Vector Number=0x5, Address error exception, store
pc= 821014b0 sp= 85febb90 STATUS= 3400ff81
zero= 00000000 at= 08110000 v0= 11223344 v1= 00000000
a0= 3400ff81 a1= 00000000 a2= 3400ff81 a3= 85feb8f8
t0= 00000000 t1= 3400ff80 t2= 3400ff81 t3= 00000000
t4= 00000001 t5= 0000009b t6= 0a0122d4 t7= 00000004
s0= 85febbe0 s1= 8219d3dc s2= 00000000 s3= 00000000
s4= 00000000 s5= 00000000 s6= 00000000 s7= 00000000
t8= 00000000 t9= 00080000 k0= eeeeeeee k1= 00000000