Enterasys Networks X-Pedition XSR CLI - Manual (Page 530)

ATM Clear and Show Commands
13-104 Configuring ADSL
Example
The following example clears the ATM counters:
XSR#clear counters atm
show controllers atm
This command displays internal hardware configuration and operational interface details
regarding: receive (Rx) and transmit (Tx) DMA descriptors, memory usage, and PCI device ID
information. When you issue the command to display sub‐interface statistics, the output returned
includes: packet processor (QOS) scheduling statistics, ATM sub‐interface counters, ATM sub‐
interface data plane status, and driver circuit statistics.
Syntax
show controllers atm {slot/card/port.sub-interface}
Mode
EXEC or Privileged EXEC: XSR> or XSR#
Examples
The following is sample output when an interface is specified:
XSR#show controllers atm 1/0
********** ATM Controller Stats **********
ATM 1/0
DSP Image File: CFlash:adsl.fls
DSP File Rev. : 1.0.0.1
DSP Image Rev.: 43e2ea93
Attenuation: 43.0 db SNR Margin: 6 db CRC Errors: 0
DMT state: 42
OAM counters: UNK counters: Cells:
ifInOctets 00000000 ifInOctets 00000000 AIS in 00000000
ifInUcastPkts 00000000 ifInUcastPkts 00000000 RDI in 00000000
ifInDiscards 00000000 ifInDiscards 00000000 RDI out 00000000
ifInErrors 00000000 ifInErrors 00000000 CC in 00000000
ifOutOctets 00000000 ifOutOctets 00000000 CC out 00000000
ifOutUcastPkts 00000000 ifOutUcastPkts 00000000 LBBK in 00000000
ifOutDiscards 00000000 ifOutDiscards 00000000 LPBK out 00000000
ifOutErrors 00000000 ifOutErrors 00000000
total_count 0
tx_notready 0
tx_toomany 0
slot The XSR slot number, ranging from 0 to 2.
card The XSR NIM number, ranging from 1 to 2.
port The XSR slot number: 0.
sub-interface Identifies a sub‐interface on that interface, ranging from 1 to 30.