Enterasys Networks X-Pedition XSR CLI - Manual (Page 249)

IP Clear and Show Commands
XSR CLI Reference Guide 5-173
show ip irdp
This command displays ICMP router discovery settings.
Syntax
show ip irdp
Configuration Mode
EXEC or Global configuration: XSR> or XSR(config)#
Sample Output
The following is sample output:
XSR>show ip irdp
FastEthernet1 has router server discovery enabled.
Broadcast address is used.
Advertisements will occur between every 450 and 600 seconds.
Advertisements are valid for 1800 seconds.
Preference will be 100.
Serial 1 has router server discovery disabled
FastEthernet2 has router server discovery disabled
Parameter Description
show ip proxy-dns cache
This command displays the proxy DNS cache.
Syntax
show ip proxy-dns cache
Mode
EXEC: XSR>
Inbound access list Indicates whether the interface has an incoming access list set.
Broadcast address is
used Type of addressing used (broadcast or multicast).
Advertisements will
occur between every
450 and 600 seconds Specified minimum and maximum advertising interval for the port.
Advertisements are
valid for 1800 seconds The configured holdtime values for the interface.
Preference is 100 The configured (or in this case default) preference value for the interface.