Enterasys Networks X-Pedition XSR CLI - Manual (Page 149)

Hardware Controller Clear and Show Commands
XSR CLI Reference Guide 4-97
datalen 0x00000000, status 0x00000000, buffer 0x80000000
datalen 0x00000000, status 0x00000000, buffer 0x80000000
datalen 0x00000000, status 0x00000000, buffer 0x80000000
datalen 0x00000000, status 0x00000000, buffer 0x80000000
datalen 0x00000000, status 0x00000000, buffer 0x80000000
[...]
RX RING:
Ring starts at 0x81568c60.
RMaxDR=512, pRCurrDR=0x00000830, RIdx=0
datalen 0x00000000, status 0x00000000, buffer 0x8ff5df60
datalen 0x00000000, status 0x00000000, buffer 0x8ff5e620
datalen 0x00000000, status 0x00000000, buffer 0x8fe86ce0
datalen 0x00000000, status 0x00000000, buffer 0x8fe873a0
datalen 0x00000000, status 0x00000000, buffer 0x8fe87a60
[...]
The secondary MAC addresses are (in hex):
[0] : < not used >
[1] : < not used >
[2] : < not used >
[3] : < not used >
show controllers serial
This command displays detailed serial controller data for an interface.
Syntax
show controller serial card/port
Mode
Privileged EXEC or Global configuration: XSR# or XSR(config)#
Sample Output
The following example displays output from Serial port 1/0:
XSR#show controllers serial 1/0
Forward Engine Serial Layer Tx/Rx Stats:
RX FROM UPPER LAYER & TX TO DRIVER
Pcks Rx = 0
Pcks Tx = 0
Pcks Discarded = 0
RX FROM DRIVER & TX TO UPPER LAYER
Pcks Rx = 0
Pcks Tx = 0
Pcks Discarded = 0
card XSR card number of the serial controller.
port XSR port number of the serial controller.