Enterasys Networks X-Pedition XSR CLI - Manual (Page 38)

snmp-server Commands
1-24 Network Management
Example
This example shows an inform with 1 retry, a 5‐second timeout and a 10 pending value:
XSR(config)#snmp-server informs retries 1 timeout 5 pending 10
snmp-server location
This command specifies the location of the SNMP server.
Syntax
snmp-server location location-string
Syntax of the “no” Form
The no form of this command deletes a location for the SNMP server:
no snmp-server location
Mode
Global configuration: XSR(config)#
Default
Null string
Example
The following example describes the SNMP server location. Note the quotation marks:
XSR(config)#snmp-server location “Beacon Street Branch”
snmp-server max-traps-per-window
This command specifies the number of traps allowed in the time window.
Syntax
snmp-server max-traps-per-window max-traps
Syntax of the “no” Form
The no form of this command sets the minimum period between successive traps to the default:
no snmp-server max-traps-per-window
Mode
Global configuration: XSR(config)#
location-string Site where the SNMP server is located.
max-traps Sum of traps permitted, ranging from 0 to 999,999,999.