Show interface vpn – Enterasys Networks X-Pedition XSR CLI User Manual
Page 158
Hardware Controller Clear and Show Commands
4-106 Configuring Hardware Controllers
ifindex 0
ifType 22
ifAdminStatus 1
ifOperStatus 1
ifLastChange 00:00:25
ifInOctets 1500
ifInUcastPkts 100
ifInNUcastPkts 0
ifInDiscards 0
ifInErrors 0
ifInUnknownProtos 0
ifOutOctets 2134
ifOutUcastPkts 14
ifOutNUcastPkts 0
ifOutDiscards 0
ifOutErrors 0
ifOutQLen 280
show interface vpn
This command displays attributes of the configured VPN interface.
Syntax
show interface vpn [0-255]
Mode
Privileged EXEC or Global configuration:
XSR#
or
XSR(config)#
Sample Output
The following is sample output displaying VPN interface 57 statistics:
XSRtop#show interface vpn 57
Vpn 57 is Admin Up
Internet address is 4.4.4.4, subnet mask is 255.255.255.0
Multicast redirect to 6.6.6.6 is enabled.
This interface includes the VPN tunnel 'Boston'.
The tunnel peer's Internet IP address is 0.0.0.0.
The tunnel encapsulation protocol is UNKNOWN.
The identity used to initiate the tunnel is ''
The tunnel's current state is Disabled.