Enterasys Networks X-Pedition XSR CLI - Manual (Page 321)

BGP Clear and Show Commands
XSR CLI Reference Guide 6-125
Display Parameters
The following is sample output from the command:
XSR#show ip bgp 55.5.5.0/24
BGP routing table entry for 55.5.5.0 255.255.255.0
Paths: (2 available, learned over EBGP)
AS Path 200, Aggregator 500 1.2.3.4
Next Hop 52.52.52.3 from 52.52.52.3 (52.52.52.3)
Origin ?, localpref 200, weight 100, atomic, valid
BGP routing table entry for 55.5.5.0 255.255.255.0
Paths: (2 available, best #1, learned over EBGP)
AS Path 300
Next Hop 192.168.72.100 from 192.168.72.100 (192.168.72.100)
Origin ?, localpref 300, med 0, weight 100, valid, best
show ip bgp community
This command displays routes associated with BGP communities.
Syntax
show ip bgp community community-number | internet | local-AS | no-export | no-
advertise
Mode
EXEC configuration: XSR>
Example
The following is sample output from the command:
Network IP address of destination network.
Next Hop IP address of the next hop to the destination network.
Metric Value of Multi‐Exit Descriminator.
LocPrf Value of Local Preference.
Weight Weight of the route.
Path AS path to the destination network.
community-number Community number, ranging from 1 to 4,294,967,295.
internet Well‐known Internet community.
local-AS Well‐known community specifying that routes with this value should
not be sent outside a local AS.
no-export Well‐known community specifying that routes with this value should
not be advertised outside a BGP confederation boundary.
no-advertise Well‐known community specifying that routes with this value should
not be advertised to any other.