Enterasys Networks X-Pedition XSR CLI - Manual (Page 101)

Platform Clear and Show Commands
XSR CLI Reference Guide 3-95
clear logging
This command deletes all messages from the logging buffer in RAM.
Syntax
clear logging
Mode
Privileged EXEC: XSR#
Example
XSR#clear logging
show buffers
This command displays platform memory statistics and is helpful in discovering where memory
leaks exist in various XSR modules. Memory is allocated in increments no smaller than 64 bytes.
Syntax
show buffers
Mode
Privileged EXEC configuration: XSR#
Sample Output
XSR#show buffers
Common Buffer Pool Usage:
Pre-Allocated: 1000 for FE
1000 for FE Frag
512 for Eth1
512 for Eth2
1536 for 4 port T1E1 card 2 in slot 0
Total: 4560 1696 byte buffers = 7733760 bytes
Used: Eth2: 128 of 512 in use. 0 allocations denied.
T1E1-0/2: 512 of 1536 in use. 0 allocations denied.
FE Frag: 0 of 877 in use. 0 allocations denied.
Fwd Eng: 0 of 877 in use. 0 allocations denied.
Eth1: 128 of 512 in use. 0 allocations denied.
Free: Buffers: 3792. Extra Mblks: 500. FrameElements: 5000
Jumbo buffers: 8192 16384 32768 65536
Available: 8/ 8 4/ 4 2/ 2 1/ 1