Enterasys Networks X-Pedition XSR CLI - Manual (Page 679)

Firewall Show Commands
XSR CLI Reference Guide 16-135
Mode
EXEC or Privileged EXEC Mode: XSR> or XSR#
Sample Output
The following output displays
Filter Source Destination Protocol ICMP Bi/Log
Name Network Network Name/Number Type
noICMP dmz private ICMP N/A Y/N
show ip firewall network
This static counter shows all network objects configured. If a network object name is specified
then only that object is displayed.
Syntax
show ip firewall network [name]
Mode
EXEC or Privileged EXEC Mode: XSR> or XSR#
Sample Output
This output displays a network object for the Engineering firewall in the 192.168.100.0/24 range:
Name Start Address End Address Internal/External
Engineering 192.168.100.1 192.168.100.254 internal
show ip firewall network-group
This static counter shows all network group objects. If a network group object is also specified
then only that network group is displayed.
Syntax
show ip firewall network-group [name]
Mode
EXEC or Privileged EXEC Mode: XSR> or XSR#
Note: Although ANY_INTERNAL and ANY_EXTERNAL objects do not display when this command is
entered, entering show ip firewall ANY_INTERNAL or ANY_EXTERNAL will display the
members of these intrinsic groups.