Enterasys Networks X-Pedition XSR CLI - Manual (Page 47)

snmp-server Commands
XSR CLI Reference Guide 1-33
snmp-server window-time
This command specifies the length, in seconds, of the moving window used to count the number
of traps sent.
Syntax
snmp-server window-time time
Syntax of the “no” Form
The no form of this command sets the length of the moving window used to count the number of
traps sent in recently to default:
no snmp-server window-time
Mode
Global configuration: XSR(config)#
Default
10 seconds
Example
The following example sets the moving window interval to ten minutes:
XSR(config)#snmp-server window-time 600
snmpMPDMIB 1.3.6.1.6.3.11
snmpUsmMIB 1.3.6.1.6.3.15
snmpVacmMIB 1.3.6.1.6.3.16
snmpEngine 1.3.6.1.6.3.10.2.1
snmpMPDStats 1.3.6.1.6.3.11.2.1
usmStats 1.3.6.1.6.3.15.1.1
usmUser 1.3.6.1.6.3.15.1.2
usmUserTable 1.3.6.1.6.3.15.1.2.2
vacmContextTable 1.3.6.1.6.3.16.1.1
vacmSecurityToGroupTable 1.3.6.1.6.3.16.1.2
vacmAccessTable 1.3.6.1.6.3.16.1.4
vacmMIBViews 1.3.6.1.6.3.16.1.5
vacmViewTreeFamilyTable 1.3.6.1.6.3.16.1.5.2
Table 1-2 MIB Names for SNMP View Commands (continued)
SNMP Term SNMP Numerical ID
time Time window interval, ranging from 1 to 3,600 seconds.