Enterasys Networks X-Pedition XSR CLI - Manual (Page 552)

ISAKMP Protocol Policy Mode Commands
14-98 Configuring the VPN
Syntax of the “no” Form
The no form of this command resets the value to the default:
no group
Default
Group 2
Mode
ISAKMP protocol policy configuration: XSR(config-isakmp)#
Example
The following example configures Group 5 on ACMEproposal:
XSR(config)#crypto isakmp proposal ACMEproposal
XSR(config-isakmp)#Group5
hash
This command sets the hash algorithm used in an IKE proposal (policy).
Syntax
hash {sha | md5}
Syntax of the “no” Form
The no form this command resets to the default ‐ sha:
no hash
Default
sha
Mode
ISAKMP Protocol Policy configuration: XSR(config-isakmp)#
Example
This example specifies MD‐5 as the hash algorithm to be used for IKE proposal ACMEproposal:
XSR(config)#crypto isakmp proposal ACMEproposal
XSR(config-isakmp)#hash md5
sha Secure Hash Algorithm1 (SHA‐1) hash.
md5 Message‐Digest Algorithm (MD5) algorithm.