Enterasys Networks X-Pedition XSR CLI - Manual (Page 350)

IGMP Clear and Show Commands
7-102 Configuring IP Multicast
show ip pim rp
This command displays the active rendezvous points (RPs) that are cached with associated
multicast routing entries.
Syntax
show ip pim rp [group-address | mapping]
Mode
EXEC configuration: XSR>
Example
The following example display sample responses:
XSR>show ip pim rp
Group: 224.2.240.20, RP: 192.168.10.13
Group: 224.1.127.155, RP: 192.168.10.13
Group: 224.2.127.154, RP: 192.168.10.13
Group: 224.2.128.153, RP: 192.168.10.13
XSR>show ip pim rp mapping
Group Address: 224.0.0.0 Mask: 240.0.0.0
RP Address: 30.0.0.20 Holdtime: 150 Priority: 192
RP Address: 50.0.0.40 Holdtime: 150 Priority: 192
Parameter Descriptions
show ip pim rp-hash
This command displays the rendezvous point (RP) that is being selected for a specified group.
Syntax
show ip pim rp-hash {group-address}
Mode
EXEC configuration: XSR>
group-address Address of the group about which to display RPs.
mapping Displays all group‐to‐RP mappings of which the XSR is aware.
Group Address of the multicast group about which to display RP data.
RP Address of the RP for that group.
Holdtime The interval before the candidate RP expires.
Priority The priority value for the candidate RP.
group-address Address of the group about which to display RPs.