Enterasys Networks X-Pedition XSR CLI - Manual (Page 40)

snmp-server Commands
1-26 Network Management
Syntax of the “no” Form
The no form sets the maximum allowed incoming and outgoing packetsize to the default:
no snmp-server packetsize
Mode
Global configuration: XSR(config)#
Default
1,500 bytes
Example
The following example specifies the peak packet size as 1000 bytes:
XSR#snmp-server packetsize 1000
snmp-server queue-length
This command sets the retransmission queue length. Traps which have no route to the host are
put into the retransmission queue for resending later.
Syntax
snmp-server queue-length length
Syntax of the “no” Form
The no command resets the retransmission queue length to the default:
no snmp-server queue-length
Mode
Global configuration: XSR(config)#
Default
10
Example
The following example sets the retransmission queue length to 50:
XSR#snmp-server queue-length 50
snmp-server set entityMIB
This command specifies physical alias and asset IDs for the entity MIB.
length Trap queue length ranging from 1 to 1000.