Enterasys Networks X-Pedition XSR CLI - Manual (Page 55)

SLA Agent Commands
XSR CLI Reference Guide 1-41
Mode
RTR Echo configuration: XSR(config-rtr-echo-xx)#
Default
Payload size: 12 bytes
Example
The following example limits the RTR payload size to 32 bytes:
XSR(config-rtr-echo-57)#request-data-size 32
tag
This command specifies an identifier (name) for this Response Time Reporter (RTR)
measurement.
Syntax
tag {name-tag}
Syntax of the “no” Form
The no form of this command removes any configured tag:
no tag
Mode
RTR Echo configuration: XSR(config-rtr-echo-xx)#
Example
The following example specifies the RTR name:
XSR(config-rtr-echo-57)#tag "one-way packet loss"
timeout
This command specifies a timeout for the Response Time Reporter (RTR). Be aware that the
timeout value must be smaller than the frequency value. So, a user cannot have a frequency of 1
second and a timeout of 1001 milliseconds.
Syntax
timeout {timeout-value}
name-tag Name assigned to this measurement.
timeout-value Timeout, ranging from 1 to 604800000 milliseconds.