Enterasys Networks X-Pedition XSR CLI - Manual (Page 122)

File System Commands
3-116 Configuring the XSR Platform
Example
XSR#rename cflash:xsr3000.fls.5512 flash:xsr3000.fls
show hostname
This command displays the name you specified for the XSR.
Syntax
show hostname
Mode
EXEC: XSR>
Example
XSR#show hostname
Sample Output
XSR#show hostname
Local hostname is XSR
show reload
This command displays data about scheduled reloads of the Enterasys Operating System (EOS).
Syntax
show reload
Mode
Privileged EXEC: XSR#
Sample Output
The following is sample output from the command when a reload is scheduled:
XSR#show reload
Reload scheduled in 9:56 minutes
eos fallback running
eos fallback not polling
eos fallback crash monitoring enabled
eos fallback config disabled
eos fallback snmp monitoring enabled 192.168.72.72
eos fallback test duration 5 minutes
eos fallback primary file flash:vpn_xsr1800.fls
eos fallback is supported by installed bootrom 3.4 (need 3.4 or newer)
The following is sample output from the command when a reload is not scheduled: