Enterasys Networks X-Pedition XSR CLI - Manual (Page 245)

IP Clear and Show Commands
XSR CLI Reference Guide 5-169
clear ip traffic-counters
This command clears all IP related counters (IP, ICMP, ARP, UDP, TCP, RIP, OSPF) displayed by
the
show ip traffic command.
Syntax
clear ip traffic-counters
Mode
Privileged EXEC: XSR#
clear tcp counters
This command clears all TCP counters.
Syntax
clear tcp counters
Mode
Privileged EXEC: XSR#
show ip arp
This command displays all entries in the ARP cache.
Syntax
show ip arp [ip-address] [H.H.H] [type number]
Mode
EXEC or Global configuration: XSR> or XSR(config)#
Sample Output
The following are sample responses:
XSR>show ip arp
Protocol Address
Age (min) Hardware Addr Type Interface
Internet 134.141.235.251 0 0003.4712.7a99 ARPA FastEthernet1
Internet 134.141.235.165 0002.1664.a5b3 ARPA FastEthernet1
Internet 134.141.235.167 4 00d0.cf00.4b74 ARPA FastEthernet1
ip-address ARP entries matching this IP address are displayed.
H.H.H The 48‐bit MAC address.
type number ARP entries learned via this interface type (Fast/GigabitEthernet) and
number are displayed.