Enterasys Networks X-Pedition XSR CLI - Manual (Page 324)

BGP Clear and Show Commands
6-128 Configuring the Border Gateway Protocol
show ip bgp inconsistent-as
This command displays routes that have incomplete originating ASs.
Syntax
show ip bgp inconsistent-as
Mode
EXEC configuration: XSR>
Example
The following is sample output from the command:
XSR#show ip bgp inconsistent-as
Local router ID is 1.1.1.4
Status codes: s suppressed, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? = incomplete
Network Next Hop Metric LocPrf Weight Path
*> 192.4.4.0/24 192.168.72.100 0 100 100 300 ?
*> 192.1.1.0/24 192.168.72.100 0 100 100 300 ?
*> 66.6.6.2/32 192.168.72.100 0 100 100 300 ?
*> 55.5.5.0/24 192.168.72.100 0 100 100 300 ?
*> 6.6.6.2/32 192.168.72.100 0 100 100 300 ?
show ip bgp neighbors
This command displays information about TCP and BGP connections to neighbors.
Syntax
show ip bgp neighbors [neighbor-address]
Mode
EXEC configuration: XSR>
Example
The following is sample output from the command. The output is filtered to show only that the
192.168.72.100 neighbor and the route refresh capability has been exchanged with this neighbor.
XSR#show ip bgp neighbors 192.168.72.100
BGP neighbor is 192.168.72.100 remote AS 300 external link
BGP version 4, remote router ID 192.168.72.100
BGP state = ESTABLISHED
neighbor-address The IP address of the neighbor whose routes the XSR has learned from.
If omitted, all neighbors are displayed.