Verilink 9000 Series (34-00271) Product Manual - Manual (Page 95)

Configuration / Operation 73
Internetworking
Applications
Line Module
This field indicates the line module number of the displayed port. Entering a
different line module number and pressing F10 transfers the program to the same
port on the new line module.
Application
This is the name of the application.
Status
Status shows if a specific application has been configured.
Modify
To configure a non-configured application or to modify an existing application,
enter Y in the modify field of the desired application. For details on specific
configurations, refer to the corresponding chapter.
Function Keys
ESC=Main Menu. Returns to the main menu.
F1=Help. Displays a help screen relative to the current field.
F5=Clear. Clears the current field and place the cursor at the left-most position.
F7=Redisplay. Redisplays the screen with the original data. Any data that was
changed on the current screen is lost.
Txport INTELLINET Configuration Program
Configuration
Internetworking Applications
Line Module [ ]
Application Status Modify
Bridge [ ]
IP Layer [ ] Not used with IP ROUTER
UDP Layer [ ] Not used with IP ROUTER
SNMP Layer [ ]
IP PAD [ ]
Boundary Routing [ ]
Virtual Stack [ ]
IP Router [ ]
IPX Router [ ]
ESC=Main Menu F1=Help F5=Clear F7=Redisplay F8=Jump F9=Previous F10=Next
Figure 4-20 Internetworking Applications Screen