Verilink 9000 Series (34-00271) Product Manual - Manual (Page 419)

Status Menu 397
Look up table entries
To display the lookup table entry, enter C. The following prompt is displayed.
ENTER TARGET ( unit.linemodule.link -> xxx.yy.zz ) :
Enter the unit number (xxx), a period (.), the line module number (yy), a period (.),
and the port number (zz). Note that for the bridge, the port number must be 08.
The following information is displayed.
Look up table
------------------
Number of entries in look up table : 0
Hit a key to continue...
Bridge's spanning tree status
To display the bridge's spanning tree status, enter D. The following prompt is
displayed:
ENTER TARGET ( unit.linemodule.link -> xxx.yy.zz ) :
Enter the unit number (xxx), a period (.), the line module number (yy), a period (.)
and the port number (zz). Note that for the bridge, the port number must be 08.
The following information is displayed.
Bridge's Spanning Tree values
---------------------------------------
Designated root id : 0000002051000024
Root path cost : 0
Root port id : 0
Max Age Timer (sec) : 20
Hello timer (sec) : 2
Forward Delay (sec) : 15
Bridge Identifier : 0000002051000024
Hit a key to continue...
Port's spanning tree status
To display the port's spanning tree status, enter E. The following prompt is
displayed:
ENTER TARGET ( unit.linemodule.link -> xxx.yy.zz ) :
Enter the unit number (xxx), a period (.), the line module number (yy), a period (.)
and the port number (zz). Note that for the bridge, the port number must be 08.
The following information is displayed.
Port's spanning tree values
---------------------------
Port number : 1
Port state : FORWARDING
Port options :
Port path cost : 100
Designated root id : 0000002051000024
Designated cost : 0
Designated bridge id : 0000002051000024
Designated port id : 1
Hit a key to continue...