Verilink 9000 Series (34-00271) Product Manual - Manual (Page 93)

Configuration / Operation 71
Port L Parameters
(Ethernet)
Port L in NMCS is the Ethernet port on the MultiPro unit.
Line Module
This field indicates the line module number of the displayed port. Entering a
different line module number and pressing F10 transfer the program to the same
port on the new line module.
Port
The port field indicates the number of the displayed port. A different port may be
selected by entering its number here and pressing F10.
Description
This is a free-form field intended to describe the location or department this port
services.
Copy Port Parameters
The three fields on this line work together to allow copying an existing port
configuration to the current port.
Configuration. The number of the source configuration to copy from is entered in
this field. This can be any existing configuration, current or otherwise.
Line Module. Enter the line module number of the port to be copied.
Port. The number of the source port to be copied from is entered here.
After these fields have been filled, press F10. This redisplays the port using the
copied values.
TXPORT INTELLINET Configuration Program
Configuration 1000
Ethernet Driver parameters
Line Module [01] Port [6] Description [ ]
Copy Port Parameters from Configuration [ ] Module [ ] Port [ ]
LAN speed (MBPS) [ 10]
Physical Port selection [UTP]
Link test Enabled [Y]
Squelch threshold [N]
ESC=Main Menu F1=Help F5=Clear F7=Redisplay F8=Jump F9=Previous F10=Next
Figure 4-19 Port L Parameters Screen