Verilink 9000 Series (34-00271) Product Manual - Manual (Page 415)

Statistics Menu 393
Display
station
statistic
To display information about a station, enter S. The following prompt is displayed.
ENTER TARGET (unit.linemodule.link -> xxx.yy.zz) :
Enter the unit number (xxx), a period (.), the line module (yy), a period (.), and the
port number (zz) desired. A display, similar to the following, is generated.
Station name ?
Enter the name of the station as it was entered when that station was configured. A
display, similar to the following, is generated.
Station statistic of TEST on link 000.01.05
Last message response time : 1.1
Avg.response time : 1.5
Number of char received : 1643
Number of char transmitted : 7744
Number of msg received : 106
Number of msg transmitted : 732
Number of receive error : 1
Number of transmit error : 1
Number of timeout : 3
Hit a key to continue...
Reset port statistics
To reset the port statistics, enter Z. The following prompt is displayed.
ENTER TARGET (unit.linemodule.link -> xxx.yy.zz) :
Enter the unit number (xxx), a period (.), the line module (yy), a period (.), and the
port number (zz) desired. The following screen is displayed.
Port statistics of port # 1 have been reset
Hit a key to continue...
Reset port (link) statistics
To reset the statistics for a port (link), enter an R at the Statistics menu. The
following prompt is displayed.
ENTER TARGET (unit.linemodule.link -> xxx.yy.zz) :
Enter the unit number (xxx), a period (.), the line module (yy), a period (.), and the
port number (zz) desired. A display, similar to the following, is generated.
Link statistics of 000.01.01 have been reset
Reset station statistics
To reset the statistics for a station, enter a Z at the Statistics menu. The following
prompt is displayed.
ENTER TARGET (unit.linemodule.link -> xxx.yy.zz) :
Enter the unit number (xxx), a period (.), the line module (yy), a period (.), and the
port number (zz) desired. A display, similar to the following, is generated.
Station name ?