Verilink 9000 Series (34-00271) Product Manual - Manual (Page 287)

16
SNMP
Introduction This chapter provides specific information for the SNMP application and how it
operates using the TXPORT MultiPro platform and NMCS software.
Configuration
/ Operation
SNMP Layer
Parameters
The SNMP parameters screen is accessed from the SNMP selection on the
Internetworking Applications screen (see Global Parameters on page 60).
Figure 16-1 shows the SNMP Layer parameters screen.
Each of these parameters is described in the following paragraphs.
TXPORT INTELLINET Configuration Program
Configuration 1000
SNMP Layer parameters
Line Module [1]
Copy SNMP Parameters from Configuration [ ] Module [ ]
Transport layer used (Udp) [U]
IP address for TRAPs [ 0].[ 0].[ 0].[ 0]
Community Name [public ]
Sys Name [enterprises.txport.pdc ]
Sys Contact [TXPORT (800)926-0085, (205)772-3770]
Sys location [No location specified ]
Delete SNMP application [ ]
ESC=Main Menu F1=Help F5=Clear F7=Redisplay F8=Jump F9=Previous F10=Next
Figure 16-1 SNMP Layer Parameters Screen