Verilink 9000 Series (34-00271) Product Manual - Manual (Page 426)

404 C HAPTER A: C ONSOLE I NTERFACE
Bisync Terminal
Port Parameters
(a) Link Speed:1200, 2400, 4800, 7200, 9600, 12000, 14400, 16800, 19200, 24000, 28800, or 38400 bps
(b) Link Interface: V35 or RS232
(c) Link Termination: DCE or DTE
(d) No. Char before Tx: 1 to 4096
(e) Turnaround: 0 to 10 (in 10-millisecond increments)
(f) Poll Timeout: 1 to 65535 (in 10-millisecond increments), 300
(g) Response Timeout: 100 to 6500 (in 10-millisecond increments), 100
(h) RTS/CTS Control: Dynamic, Fixed On, or Floating
(i) Drop DTR on DCD: Yes or No
(j) Link Active: DSR & DCD, DSR Only, or Don’t Care
(k) Offline Count: 1 to 255 non-answered polls or selects, 3
(l) Offline Retry: 1 to 255 seconds, 30
(m) Select Between Poll: 1 to 255 select sequences
(n) Select Retry Delay: 1 to 255 seconds, 10
(o) Activity Timer: 0 to 255 minutes
(p) Max Messages Queued: 1 to 255, 4
(q) End-to-End Flow Control: Yes or No
(r) Protocol Conversion: Yes or No
(s) Address List (a) CU Address: 00
16
to FF
16
(b) CU Type: RMBCS, 3274, 3275, 2780, or 3780
(c) Device List (a) Device Address:
(b) Connect Address: two displayable ASCII characters,
(CU Address/Device Address combination)
(c) Connect Name: up to 17 ASCII characters, null string
(d) Options Automatic Connection on Power On (Y or N) ?
Don’t Send Status Messages (Y or N) ?
Reserved Channel (Y or N) ?
Sharable (Y or N) ?
Station Not Pollable (Y or N) ?
Keep Message (Y or N) ?
Wait for Host Connection (Y or N) ?
Flush Output If Offline (Y or N) ?
Print Spooler (Y or N) ?
(e) Clear Defaults are underlined.