Verilink 9000 Series (34-00271) Product Manual - Manual (Page 418)

396 C HAPTER A: C ONSOLE I NTERFACE
Bridge
Status
To display information about the bridge, enter B. The following screen is
displayed.
BRIDGE STATUS MENU
------------------
A - General status
B - Port list and port status
C - Look up table entries
D - Bridge's spanning tree status
E - Port's spanning tree status
M - Main status menu
Enter choice :
General status
To display general information about the bridge, enter A. The following prompt is
displayed:
ENTER TARGET ( unit.linemodule.link -> xxx.yy.zz ) :
Enter the unit number (xxx), a period (.), the line module number (yy), a period
(.), and the port number (zz). Note that for the bridge, the port number must be 08.
The following information is displayed.
Bridge general information
---------------------------
Bridge name : b001
Bridge Identifier : 0000002051000024
LAN type : ETHER
LAN speed : 10 MB
LAN state : ACTIVE
Filter ageing timer (sec) : 300
Forwarding options :
Max Age Timer (sec) : 20
Hello timer (sec) : 2
Forward Delay (sec) : 15
LAN path cost : 100
WAN path cost : 667
Hit a key to continue...
Port list and port status
To display the list of ports with status, enter B. The following prompt is displayed.
ENTER TARGET ( unit.linemodule.link -> xxx.yy.zz ) :
Enter the unit number (xxx), a period (.), the line module number (yy), a period (.)
and the port number (zz). Note that for the bridge, the port number must be 08.
The following information is displayed.
List of ports with status
-------------------------
Name of bridge Port State Opt PDC LM Type Speed
----------------------------------------------------------------
b001 1 FORWARDING NNN 000 1 ETHER 10 MB
Hit a key to continue...