Verilink 9000 Series (34-00271) Product Manual User Manual
Page 342
320
C
HAPTER
19: IPX R
OUTER
NLSP Area Mask
The mask indicates how many bits of the network number identify the area. The
default value is 0.
Broadcast HELLO Interval
This is the interval, in seconds, between NLSP HELLO packets sent on a LAN
circuit by systems other than the circuit’s designated router (DR). It ranges from 1
to 65535. The default value is 10.
Non-broadcast HELLO Interval
This is the interval, in seconds, between NLSP HELLO packets sent on WAN
circuits. It ranges from 1 to 65535. The default value is 10.
Designated Router HELLO Interval
This is the interval, in seconds, between NLSP HELLO packets sent on a LAN
circuit by the circuit’s designated router (DR). It ranges from 1 to 65535. The
default value is 3.
Holding Time Multiplier
When a HELLO packet is not received for a period of seconds of (Holding Time
Multiplier
×
HELLO Interval), the adjacent router is considered dead. On a WAN,
this period is 5
×
10 = 50 seconds with the default values. It ranges from 1 to
65535. The default value is 5.
Clear IPX ROUTER application
Use this option to clear the IPX Router Configuration from the TXPORT device.
Selecting this option restores the default values.