Verilink 9000 Series (34-00271) Product Manual - Manual (Page 243)

Configuration / Operation 221
Option E - RFC 1490 Encapsulation with the Boundary Router
Application
When set for a specific DLCI, this option allows the MultiPro unit to communicate
with a router using the RFC 1490 encapsulation for interoperability (Figure 12-17).
Figure 12-17 Typical Application Using RFC 1490 Encapsulation with Boundary
Router Application
Figure 12-18 shows the endpoint list for unit 001’s frame relay port which
connects to the router through the public frame relay. The configuration of the
frame relay port of unit 002 is identical assuming that the same DLCI is used.
Figure 12-18 Endpoint List for Unit 001 Connected to the Router through Public
Frame Relay
DOWNLOAD CONFIG
MODE BACKUP NET ALARM POWER
PRISM 9111 T R A N S P O R T
®
Unit 002 IP Router
Frame Relay
Ethernet Ethernet
DOWNLOAD CONFIG
MODE BACKUP NET ALARM POWER
PRISM 9111 T R A N S P O R T
®
Unit 001
Ethernet
IP range from
192.1.1.41 to
192.1.1.80
IP range from
192.1.1.30 to
192.1.1.40
192.1.1.1
TXPORT INTELLINET Configuration Program
Configuration 9 rfc1490 option for fry
Frame Relay / Phoenix Multidrop List Endpoint
Line Module [1 ] Port [2] Description Frame Relay Transport
Copy Access List from Configuration [ ] Module [ ] Port [ ]
Address/ Alternate Default Options
DLCI Endpoint Endpoint Connect ABCDEFGHIJKLMNOP
0016 ROUTER NNNNYNNNNNNNNNNN
PgUp/PgDn=Scroll Return=Leave